Products

Brief: this product for sale is electronic spindle motors for cnc router. Model number is GDZ-100-3, power is 3.0kw, spindle diameter is 100mm, maximum speed is 24,000rpm. Cooling way is water or liquid. Water cooling is prior to air cooled spindles on cooling performance. Also, simply because this, water cooling spindle is ideal for both long time machining such as relief carving and short time machining like cutting jobs. It can keep working for 8 hours without stop if you change the water in time.
spindle motor gdz-100-3 100x220 380v 3kw 9a 400hz 24000rpm

CNC Spindle Motor GDZ-100-3 Specification

Model. No | GDZ-100-3

Spindle Diameter | 100mm

Rated Power | 3.0KW

Max. Speed | 24000RPM

Rated Voltage | 380V or 220V

Current | 9A

Frequency | 400Hz

Collet | ER20

Acceptable Router Bit Shank Size | 3.175 ~ 12.7mm (from 1/8 inch to 1/2 inch)

Cooling Way | liquid or water

Maintenance | water need to be changed regularly during machining

Net Weight | 9KGS

Application | cnc wood router, cnc wood lathe, stone working router, and other woodworking equipment
high speed spindle motor 3kw gdz-100-3 nameplate

Entire Models of High Speed Spindle Motor We Provide:

GDZ-80-1.5 (1.5kw 80mm diameter), GDZ-80-2.2 (2.2kw 80mm diameter 220V), GDZ-80-2.2B(2.2KW 80mm 380V) GDZ-100-3 (3.0kw 100mm diameter), GDZ-100-4.5 (4.5KW 100mm diameter), GDZ-125-5.5 (5.5kw 125mm diameter)
Available input voltage: both 220V and 380V 
spindle motor gdz-100-3 cable connector and water circular connector

After you get a new spindle replacement, please click here to learn useful tips concern how to make it work for you longer. 

Common Sense Tip: the difference between water-cooled spindle motor and air-cooled spindle

1. Water cooling spindle is using of water circulation to cool the heat generated by the spindle rotating at high speed. The cooling effect will be good because the motor temperature (usually tested) will not exceed 40 degrees after the water has been circulated; the air cooling spindle is cooled by a fan from the top of spindle, and the cooling effect is definitely not as good as that of water cooling. Due to this point, water cooled spindle is more suitable to do the long time carving work than air-cooled spindle. But this is not mean that air cooled spindle cannot do carving jobs, it can do also, just its service life will get reduced after working for more than 4 hours continuously. For example, the carving jobs will take 6 hours to finish; machine with air cooled spindle have to work 4 hours first, then take a rest like 30 minutes, next start again to finish the carving. This way will have no harm on spindle. It will do harm to air cooled spindle to make it work for more than 4 hours continuously. While if same case to water cooled spindle, you can let it work for 6 hours without rest until finish the jobs. 

2. Noisy. The water-cooled spindle is essentially noiseless, but the air-cooled spindle is relatively noisy.  

3. Service life. If we did good maintenance on water cooled spindle like change water frequently or use industrial chiller for it, the service life of it will be much longer than air cooled spindle.  

If any interest on our spindle motor, please inquire now

To check entire cnc part replacement we have, please click here 

Please watch the video here for better understand 




Go Back 】 | 【 Close this window