Products

CNC Router 1530 is a usual model which is designed to suit for 5×10 feet size sheet material working. 5x10 cnc router is mainly used for panel furniture and wood door carving or routing. The table of this wood door carving machine is an ideal design which combines vacuum-sorb table and T-slot clamp table together. Compared with tradition vacuum table, this one gets more capacity on fix materials by vacuum and by clamp especially when you fix a small piece block.  

cnc router 1530

Application

Materials good for CNC carving machine EA-1530SV is solid wood, MDF, plastic, PVC, acrylic, and other nonmetal materials.

Field: panel furniture, cabinet, wood door, bed, chair, slat wall, decoration wall, sign making and so on.    
 

wood door carving jobs by wood routerdecration wall finished by eagletec cnc router slat wall machining by wood routerwood carving jobs made by cnc carving machinecutting works by cnc wood routersign cutting by wood router

Features

1) Ideal design on table which gives more possibility on work piece fix. It gives two choice on fix type, vac-sorb and clamp. 
vacuum table cnc router 1530

2) Frame of CNC router 1530 is welded with thick-wall steel tube; processed vibrating stress relief (VSR) to reduce residual stress; and it is supported by 6 legs with adjustable leveling feet.

3) The X and Y axis transmission is by rack and pinion, which is hardened for extremly

long life and ground for a very good accuracy; The Z axis transmission is driven by a hardened

rolling antibacklash ball screw.

4) Each axis of motion is supported on high precision linear guide ways. Hiwin linear guides

allow for higher feed speeds and a better finish of cut. 

5) The Y-axis uses a dual drive, one drive motor for each side of the gantry.

6) Software suitable for 1530 wood router: CAD/CAM designing software e.g. Type 3/Artcam/UcanCAM etc.

7) All the linear guides are centrally lubricated from a central system.

Technical Parameter of wood door carving machine

Working Size (X Y Z)

1500×3000×200 mm (5x10)

Driving Motor

Stepping big size

Controller

RichAuto DSP

Command

G-code

Max.Traveling Speed

35 m/min

Work-Holding

By Vac-sorb or Clamp, both available

Vacuum Pump

5.5KW water ring, flow rate 230 CBM/hour

X Y Transmission

Rack and pinion transmission

Z Transmission

Taiwan TBI rolling ballscrew

Spindle

4.5 kw , China air cooling, 0-18000 rpm variable speed

Collet Size

ER25 , available diameter of cutter bits φ3.175-φ16mm

Working Power

380V/50-60Hz, 3 Phase 4 Wire

Max.Power Consumption

14 KW

Net Weight

1500 KGS

Packing

Plywood case suitable for sea shipment





 

Go Back 】 | 【 Close this window