Tel: +86-531-82956850
Fax: +86-531-82956850
Mobile: +86-13065026945
E-mail: [email protected]
Skype: live:sales_52617
QQ: 1638464239

News

Location:Home > News

CNC Router Fuling Inverter DZB300 DZB200 Setup Guideline

The variable frequency drive inverter is the control unit of the cnc router electric spindle. In order to make the electric spindle work normally, it is necessary to set up the parameters of the inverter properly. This article we are looking at the setup guideline of the Fuling inverter on cnc router machines and cnc wood turning lathe machines. (DZB300 & DZB200 Series)

Order Fuling inverter DZB300 series, please click here. If DZB280 series, please click Fuling Converter DZB280

EagleTec-CNC is a specialized company for building cnc router machines of great quality and provide best support to our customers.

Because some too many friends have asked us for assistance, we only share knowledge now and do not provide free technical support to friends we don’t know; please understand.

Of course, for our customers, we will always provide the best free technical support to them.

fuling inverter setup

Below are the parameter items we need set up for Fuling inverter DZB300 & DZB280 models which are mounted on wood cnc machine.

1) Code F0.01- Command source selection of fuling inverter

Setup Range: 0- keyboard; 1- terminal; 2- communication

Default Value: 0

Proper Value Should Be Set Up: 1

2) Code F0.03- Frequency command selection of fuling inverter

Setup Range: 0- keyboard; 1- VI; 2- CI; 3- VI+CI; 4- Multi-speed; 5- PID control; 6- communication

Default Value: 0

Proper Value Should Be Set Up:
4 (if controller is richauto dsp
1 (if controller is weihong nc studio)

3) Code F0.04- Maximum output frequency of fuling inverter

Setup Range: 10.00~600.00Hz

Default Value: 50.00Hz

Proper Value Should Be Set Up: this parameter should be set up according to the frequency of the electric spindle on your cnc router machine. Please check the nameplate of your spindle, if there wrote 300Hz, then set up it 300Hz; if 400Hz, then set up 400Hz here.

4) Code F0.05- Upper limit frequency of fuling inverter

Setup Range: 0.00Hz~F0.04 (code)

Default Value: 50.00Hz

Proper Value Should Be Set Up: same value as code F0.04

5) Code F0.08 Electric spindle motor ACCEL time

Setup Range: 10.0~20.0s (for cnc router electric spindle)

Default Value: 10.0s

Proper Value Should Be Set Up: 15.0s

6) Code F0.09 Electric spindle motor DECEL time

Setup Range: 10.0~20.0s (for cnc router electric spindle)

Default Value: 10.0s

Proper Value Should Be Set Up: 15.0s

7) Code F0.10 Electric spindle motor run direction selection

Setup Range: 0- electric spindle motor running at default direction; 1- running at reverse direction; 2- No inverse running

Default Value: 0

Proper Value Should Be Set Up: 2

8) Code F0.25 Terminal command protection of fuling inverter when power on

Setup Range: 0- Terminal command invalid when power on; 1- Terminal command valid when power on.

Default Value: 0

Proper Value Should Be Set Up: 1

9) F1.00 Electric spindle motor model

Setup Range: 0- B model; 1- P model; 2- high speed model

Default Value: 0

Proper Value Should Be Set Up: 2

10) F1.01 Electric spindle motor rated power

Setup Range: 0.4~900.0kw

Proper Value Should Be Set Up: this parameter should be set up according to the rated power of the electric spindle on your cnc router machine. Please check the nameplate of your spindle, if there wrote 3.0kw, then set up it 3.0kw; if 4.5kw, then set up 4.5kw here; other values are the same.

11) F1.02 Electric spindle motor rated frequency

Setup Range: 0.01Hz~F0.04 (code)

Proper Value Should Be Set Up: same value as code F0.04

12) F1.03 Electric spindle motor rated speed

Setup Range: 0~36000 rpm

Proper Value Should Be Set Up: this parameter should be set up according to the maximum rpm of the electric spindle on your cnc router machine. Please check the nameplate of your spindle, if there wrote 18000rpm, then set up it 18000; if 24000, then set up 24000 here; other values are the same.

13) F1.04 Electric spindle motor rated voltage

Setup Range: 0~460V

Proper Value Should Be Set Up: this parameter should be set up according to the rated voltage of the electric spindle on your cnc router machine. Please check the nameplate of your spindle, if there wrote 380V, then set up it 380; if 220V, then set up 220 here; other values are the same.

14) F1.05 Electric spindle motor rated current

Setup Range: 0.1~1000.0A

Proper Value Should Be Set Up: this parameter should be set up according to the rated current of the electric spindle on your cnc router machine. Please check the nameplate of your spindle, if there wrote 8.5A, then set up it 8.5; if 9.7A, then set up 9.7 here; other values are the same. 

Please watch the video demo below to understand better. 

Except the 14 parameters here, for the other codes of Fuling inverter, please just keep their default value.
To learn the wiring, please read fuling inverter wiring connection tutorials

If need any further assistance, feel free to contact us.
If you are looking for a brand new Fuling inverter, please inquire now

                                                                                  Origin article from Jinan EagleTec CNC Machinery Co.,Ltd.

                                                                                  Repost please indicate the source.  


 

Go Back 】 | 【 Print 】 | 【 Close this window